Articles on: Dispatching

Releasing and unreleasing Tasklist for Drivers by Dispatcher

Guide: How to release and unrelease tasklists for drivers



About releasing tasklists


You can hold a tasklist back while you are still planning it. An unreleased tasklist cannot be selected by drivers in the app. When the tasklist is ready, you release it and drivers can select it as usual.


You can release a tasklist yourself from Dispatching, have it released when you mark planning as done, and choose whether tasklists created by a tray or by VRP start as unreleased.


Good to know: Tasklists are released unless you choose otherwise, so nothing changes for your drivers until you start using this feature.



Release a tasklist from Dispatching


Step 1. Select the vehicle


Open Dispatching and select the vehicle in the fleet list.


Step 2. Check the release button


Look at the release button in the toolbar above the task list. A red mark on the button means the tasklist is unreleased.


Dispatching with an unreleased tasklist and the release button marked


Step 3. Release the tasklist


Select the release button. A confirmation appears. Select Continue to release the tasklist, or Cancel to leave it unreleased.


Release tasklist confirmation


Step 4. Check the result


The button now shows a green tick. The tasklist is released and drivers can select it.


Dispatching with the tasklist released


Unrelease a tasklist


To unrelease a tasklist again, select the same button.


Find unreleased tasklists


In the filters above the fleet list, turn on Show unreleased only. The list then shows only vehicles that have an unreleased tasklist, so you can see what is still waiting to be released.


Release a tasklist when planning is done


Marking planning as done also releases the tasklist. Open the menu above the task list and select Mark planning done.


Task list menu with Mark planning done



Start tasklists as unreleased


Trays


If a tray assigns orders to a vehicle, you can have the resulting tasklist start as unreleased.


  1. Open the tray ( Create or Edit tray).
  2. Under Trip optimizing, tick Tasklist unreleased by default.
  3. Select Save.


Edit tray with Tasklist unreleased by default ticked


VRP


The same option is available when you create trips with VRP.


  1. Open Create VRP trips.
  2. Under Options, tick Tasklist unreleased by default. It is at the end of the list, after Set pins on stops when assigned to trips.
  3. Select Apply.


VRP options with Tasklist unreleased by default ticked




Need help?


Contact us at support@dropboy.com or visit www.dropboy.com.

Updated on: 15/11/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!