Articles on: Settings

Guide: How to setup 2FA for your company

Two-Factor Authentication (2FA) User Guide


For Administrators and Users | November 2026



About 2FA


Two-Factor Authentication (2FA) adds a second step to signing in to Dropboy. After your username and password, you also enter a 6-digit code. You can use the code from an authenticator app on your phone, or a code that Dropboy sends to your email. This keeps your account safe even if someone else learns your password.


Who

What they do

Administrator

Chooses which roles use 2FA in Role Management.

Users in a role with 2FA turned on

Enter a 6-digit code every time they sign in, from an authenticator app they set up once or from an email. They can choose Remember me for 30 days to skip the code on a device they use regularly.


Good to know: 2FA is off by default for all roles. As soon as 2FA is turned on for any role, it is automatically turned on for the Admin role too. Turning on a role does not send any email. Each user gets the setup email when they next sign in. You have 5 attempts to enter the 6-digit code. After 5 wrong codes the account is locked for 24 hours, or until an Admin resets the 2FA. There is no enforcement deadline. Your Admin decides when 2FA is turned on for each role and user.


What you need


  • A working email address on your Dropboy profile. The setup email and the email sign-in codes are sent there.
  • To use an authenticator app: a smartphone with Google Authenticator or Microsoft Authenticator (free in the App Store and Google Play), with the phone's date and time set to automatic so codes stay valid.


No authenticator app? You can sign in with a code sent to your email instead. See Sign in with an email code.


Get the authenticator app


App

iPhone

Android

Computer / web

Google Authenticator

App Store

Google Play

Website

Microsoft Authenticator

App Store

Google Play

Website



For Administrators


Transport Buyer and Hauler accounts


Turn on 2FA for your roles


Step 1. Open Role Management


Log in to the Dropboy console and select the highlighted icon in the left-hand menu to open Role Management.


Select the highlighted icon in the left-hand menu to open Role Management


Step 2. Check the starting point


By default no role is selected. The screen says that two-factor authentication is off for your company.


Role Management with no roles selected


Step 3. Turn on 2FA and save


Toggle on 2FA Enabled next to each role that should use 2FA, then click SAVE.


The Admin role is switched on automatically, because Admins always need 2FA when any role is selected.


Role Management with 2FA Enabled toggled on for roles


Good to know: Turning on a role does not send any email. Each user gets the setup email when they next sign in and press SEND EMAIL. The setup email goes to the address on each user's profile. Make sure every user in an enabled role has a working email address. Drivers often use shared or generic addresses, so check these before you turn on the Driver role. To stop requiring 2FA for a role, toggle it off the same way and click SAVE.


Step 4. Turn 2FA on or off for a user


Navigate to the user listing and select the user.


If the Admin has turned on 2FA for the role, all users associated with that role will have 2FA enabled, and you can see it here.


To turn off 2FA for a particular user, select the Two factor authentication is enabled toggle.


User profile showing the Two factor authentication is enabled toggle


Reset a user's 2FA


Use this when a user has lost their phone, changed device or can no longer get codes from their authenticator app, or when a user is locked out after entering the wrong code 5 times.


A user who has lost their phone can still sign in with a code sent to their email. Reset their 2FA when they are ready to set up the authenticator app on a new device.


Alternative Email Address


If there is any reason where the user cannot use their primary email address to get their email the admin can add an alternative email for the user by editing the user profile. Enter a the alternative email and they would recieve emails on that that email.


Add alternate email



A user who has lost their phone can still sign in with a code sent to their email. Reset their 2FA when they are ready to set up the authenticator app on a new device.



Step 1. Open the user's profile and find Security


Open the user from the Users list. Under Security, click RESET TWO-FACTOR AUTHENTICATION.


The note below the button explains when to use it: when the user has lost the phone with the authenticator app.


Security section with the Reset two-factor authentication button


Step 2. Confirm the reset


Dropboy asks you to confirm. The user is signed out everywhere and has to set up 2FA again at the next sign in.


Click Reset.


Reset two-factor authentication confirmation dialog


Check that the user's email address is correct before you reset. The new setup email is sent there.


Locked accounts: A user who enters the wrong 6-digit code 5 times is locked for 24 hours. Resetting their 2FA unlocks the account sooner. If your company has only one Admin and that Admin enters the wrong code 5 times, nobody else can reset their 2FA. Contact support at support@dropboy.com to have it reset.



For Users


If your role has 2FA turned on, you confirm each sign-in with a 6-digit code. You can set up an authenticator app the first time you sign in. It takes about two minutes and only needs to be done once, or again if your Admin resets your 2FA. If you prefer not to use an app, you can sign in with a code sent to your email. See Sign in with an email code.


The steps at a glance


  1. Sign in with your username and password.
  2. Request the setup email.
  3. Open the email and add Dropboy to your authenticator app by scanning the QR code or typing the setup key.
  4. Go back to Dropboy and select Continue.
  5. Enter the 6-digit code from the app.


Web browser


Use these steps when you sign in to Dropboy in a web browser on a computer.


Step 1. Sign in


Go to the Dropboy sign-in page, enter your email and password, and click LOGIN. Tick Remember me for 30 days first if you want to skip the code on this device for the next 30 days. See Remember me for 30 days.


login



Step 2. Request the setup email


If you have not set up an authenticator yet, Dropboy shows Setup 2 Factor Authorization. The email address is partly hidden for privacy.


Click SEND EMAIL.


Prefer not to use an app? Click USE THE CODE EMAILED TO YOU instead and continue with Sign in with an email code.


Setup 2 Factor Authorization screen with the Send Email button


Step 3. Open the setup email


Open the email from the Dropboy team. It contains a QR code and, further down, a setup key. You can scan the QR code on your computer screen with your phone.


Setup email containing the QR code and setup key


Step 4. Add Dropboy to your authenticator app


  • Open Google Authenticator or Microsoft Authenticator on your phone. Not installed yet? See the official download pages: Google Authenticator or Microsoft Authenticator.
  • Add a new account and scan the QR code from the email.
  • If you cannot scan it, choose Enter a setup key in the app and type in the key from the email.
  • The app now shows a 6-digit code for Dropboy.


Step 5. Go back to Dropboy and click Continue


After the email is sent, Dropboy shows this screen. Once your authenticator app is set up, click CONTINUE.


Need the email again? Wait for the countdown to finish, then click SEND AGAIN.


Continue screen shown after the setup email is sent


Step 6. Enter the 6-digit code


Type the 6-digit code shown in your authenticator app and click LOG IN. You can also enter a code sent to your email in the same field.


Authenticator codes refresh every 30 seconds, so enter the current one.


You have 5 attempts to enter the correct code. See If your account is locked below.


Enter the code screen


iPhone (iOS)


Step 1. Sign in


Open the Dropboy app, enter your username and password, and tap Login.


Dropboy iOS sign-in screen


Step 2. Request the setup email


If you have not set up an authenticator yet, Dropboy shows Set up two-factor authentication. The email address is partly hidden for privacy. Tap SEND EMAIL.


Set up two-factor authentication prompt on iOS


Step 3. Open the setup email


Open the email from the Dropboy team. It contains a QR code and, further down, a setup key.


Setup email on iPhone showing the QR code


Step 4. Add Dropboy to your authenticator app


  • Open Google Authenticator or Microsoft Authenticator. Not installed yet? Get it from the App Store: Google Authenticator or Microsoft Authenticator.
  • Add a new account and scan the QR code from the email.
  • If you cannot scan it, for example because you are reading the email on the same phone, choose Enter a setup key in the app and type in the key from the email.
  • The app now shows a 6-digit code for Dropboy.


Step 5. Go back to Dropboy and tap Continue


Return to the same Dropboy screen where you requested the email and tap Continue.


Step 6. Enter the 6-digit code


Type the 6-digit code shown in your authenticator app and tap LOG IN. Codes refresh every 30 seconds, so enter the current one. You have 5 attempts to enter the correct code. See If your account is locked below.


Enter the code screen on iOS


Android


Step 1. Sign in


Open the Dropboy app, enter your username and password, and tap Login.


Dropboy Android sign-in screen


Step 2. Request the setup email


If you have not set up an authenticator yet, Dropboy shows Setup 2 Factor Authorization. The email address is partly hidden for privacy. Tap SEND EMAIL.


Setup 2 Factor Authorization prompt on Android


Step 3. Open the setup email


Open the email from the Dropboy team. The QR code is at the top. The setup key is further down.


The email also reminds you to keep it private and delete it when you have finished.


Setup email on Android showing the QR code at the top


Setup email on Android showing the setup key further down


Step 4. Add Dropboy to your authenticator app


  • Open Google Authenticator or Microsoft Authenticator. Not installed yet? Get it from Google Play: Google Authenticator or Microsoft Authenticator.
  • Add a new account and scan the QR code from the email.
  • If you cannot scan it, for example because you are reading the email on the same phone, choose Enter a setup key in the app and type in the key from the email.
  • The app now shows a 6-digit code for Dropboy.


Step 5. Go back to Dropboy and tap Continue


After the email is sent, Dropboy shows this screen. Once your authenticator app is set up, tap CONTINUE.


Need the email again? Wait for the countdown to finish, then tap SEND AGAIN.


Continue screen on Android


Step 6. Enter the 6-digit code


Type the 6-digit code shown in your authenticator app and tap LOG IN. Codes refresh every 30 seconds, so enter the current one. You have 5 attempts to enter the correct code. See If your account is locked below.


Enter the code screen on Android


Signing in after setup


  • Enter your username and password as usual.
  • Dropboy asks for the 6-digit code. Open your authenticator app and type in the current code, or use a code sent to your email.
  • Tap LOG IN.


Skipped the Continue step? No problem. Just log in again. If your authenticator is already set up, Dropboy asks for your 6-digit code. If not, it takes you through the setup again.


Sign in with an email code


You can finish signing in with a 6-digit code sent to your email instead of the code from your authenticator app. Both codes are entered in the same field, so use whichever is easier at the time.


Step 1. Sign in


Enter your email and password and click LOGIN.




Step 2. Get the code by email


  • If you have set up an authenticator app, Dropboy shows Enter the code. Click SEND THE CODE AGAIN to have a code emailed to you. The link becomes available after a short countdown.
  • If you have not set up an authenticator app, Dropboy shows Setup 2 Factor Authorization. Click USE THE CODE EMAILED TO YOU.




Step 3. Open the email


Open the email from the Dropboy team. It is sent from 2fa-no-reply@mail.dropboy.com and contains a single 6-digit code. The code expires 5 minutes after it is sent.




Step 4. Enter the code


Type the code from the email in the 6-digit code field and click LOG IN.


Good to know: If your Admin has added an alternative email address to your profile, the code is sent to both addresses and either email can be used. The Dropboy apps for iPhone and Android accept the email code in the same field as the authenticator code. The 5-attempt limit applies to email codes too.


Remember me for 30 days


Tick Remember me for 30 days on the sign-in page before you click LOGIN. After you enter a correct code, Dropboy trusts that device for 30 days and asks only for your email and password there.


  • Trust applies to one device and browser. Any other device still asks for a code and can be remembered separately, with its own 30 days.
  • The 30 days start when you enter the code. Signing in again during that time does not extend them.
  • After 30 days you are asked for a code again and can tick the box to remember the device for another 30 days.
  • If you log out, you are asked for a code the next time you sign in on that device.
  • If you change your password, or your Admin resets your 2FA, all your remembered devices are cleared and every device asks for a code at the next sign in.


Sign-in page with the Remember me for 30 days checkbox


If your account is locked


You have 5 attempts to enter the correct 6-digit code. After 5 incorrect codes, your account is locked for 24 hours, or until your Admin resets your 2FA. To get back in sooner, ask your Admin to reset your two-factor authentication. You will then set up your authenticator app again at your next sign in. If you are the only Admin, contact support at support@dropboy.com to have your 2FA reset.



Troubleshooting


Problem

What to do

I did not get the email sign-in code

Check your spam or junk folder for an email from 2fa-no-reply@mail.dropboy.com. Codes expire after 5 minutes, so click SEND THE CODE AGAIN once the countdown has finished to get a new one. Make sure the email address on your profile is correct (ask your Admin to check it).

I did not get the setup email

Check your spam or junk folder. Make sure the email address on your profile is correct (ask your Admin to check it), then tap SEND AGAIN once the countdown has finished.

I cannot scan the QR code

In your authenticator app choose Enter a setup key and type in the key from the email. Use this if you are reading the email on the same phone.

My code is not accepted

For an authenticator code, use the current code, because codes change every 30 seconds. Make sure your phone's date and time are set to automatic, and that you are using the Dropboy entry in the app. For an email code, use the newest email and enter the code within 5 minutes.

I lost my phone or changed device

Sign in with a code sent to your email. To use an authenticator app on your new device, ask your Admin to reset your two-factor authentication, then set up again.

My account is locked

You entered the wrong 6-digit code 5 times. Wait 24 hours, or ask your Admin to reset your two-factor authentication. If you are the only Admin, contact support@dropboy.com.


Keep your account safe


  • Treat the QR code and setup key like a password. Anyone who has them can create your sign-in codes.
  • Do not share or forward the setup email. Delete it when you have finished.
  • Never share an email sign-in code with anyone. Dropboy will not ask you for it.
  • If you were not expecting a setup email or a sign-in code, you can ignore it. Your password is still required to sign in. Ask your administrator if you need help.



Need help?


Contact us at support@dropboy.com or visit www.dropboy.com.

Updated on: 15/11/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!